Locate the coin mechanism on the inside of the door, just behind the coin slot on the outside of the machine. Unplug the wires, loosen the screw holding it to the door with a Phillips screwdriver and pull it out, rotating it as you do so. Insert a quarter into the front of the mechanism and observe its path as it drops through.

1. Executive Summary of the Coin Detector And Counter A coin detector and counter comprising a coreless oblong transmitter coil and a coreless oblong receiver coil spaced apart on opposite sides of a coin path arranged to cause the entire diameter of each coin to pass between the coils.
2. A coin simply makes an electrical contact between the two wires as it slides down the slope. Another way to make a coin mechanism is to buy a low torque microswitch. The weight of a coin is enough to trip the switch as it falls. You can make the coin slot and slide out of metal, plywood or even cardboard.
3. Canadian Coin Mechanism Restorations. There are at least two different styles of this coin mechanism. Commonly it is called a transitional coin mech which is incorrect. In fact this is a Canadian coin mechanism seen on Vendo and Vendorlator large door machines including the 44's.
4. Slide-operated coin mechanisms are used for a number of coin based services, from newspaper racks to coin-operated laundry machines. These devices have vertical slots into which coins are put (typically quarters) that are set in width to match the width of specific coins; some can also take tokens that are shaped like.

The laundry industry is as big today as it’s ever been and nothing is likely to change that in the foreseeable future. There are around 30,000 coin-operated commercial laundries in the US that generate an annual gross revenue of $5 billion. These figures don’t include communal laundry facilities provided in apartment buildings and other multi-family housing buildings and rental homes. Simply put, the laundromat business is steady, strong, and vibrant. So there are plenty of coins going through plenty of machines and occasionally one gets stuck.

When the mechanism is new and the coin undamaged it’s rare to see any jams. Everything slides through perfectly well and nobody has to get frustrated. However, the washers get used heavily and parts wear also the coins are rarely the perfect shape they were when they were made. All this means coins get stuck from time to time.

In an ideal world, the stuck coin may fall out of the chute by just pressing the coin return button but you’re reading this so we guess that didn’t work.

• Use tweezers to reach into the coin slot. See if you can grasp the coin and pull it out.
• Chances are someone has already slapped the side of the machine where the coin slot is located. Try upping your game, place a piece of wood (or something that will protect the paintwork) against the side nearest to the slot and use a hammer to rap sharply on the wood to try to unjam it. Don’t hammer too hard as to cause damage but the vibration may loosen the stuck coin and will make it fall in or out.
• Insert another coin into the slot hoping it will dislodge the previous one.
• Sometimes one of the coin slots may have a coin tipped to the side that prevents the coin slot from moving. Push the tilted coin upright using a utility knife.

Dis-assembly

Sometimes the coin is not the problem or the coin is bent or is still stubbornly clinging on.

Stuck coin slides may be caused by factors other than coins, such as a loose screw jammed between the coins and the ramp. If the above fixes don’t work, and you still don’t want to call a service technician, you might need to open the coin box or extract the entire coin assembly.

If you’re not the owner of the machine, there’s nothing you can do about it. Report the problem to the owner or building proprietor. If you have the keys for the access panel, opening the coin box can often dislodge a stuck coin. Removing the entire coin assembly can be tricky and it depends on the type of machine you have.

Diy Coin Slot Mechanism Hardware

There are a few types of coin acceptor the main ones are; the upright, the flat sliding mechanism, and the dial types.

Diy Coin Slot Mechanism Car Bodies

In general, the coin slot mechanism is housed to one side on the top of the washer and is either the upright type or the sliding type, the dial type being more common on dryers.

• First, remove the coin store tray, empty it and check if there is anything obvious in the coin shoot inside.
• Get a pen and notepad and record where you have removed any screws, nuts, connections etc.
• Remove the maintenance panel which is usually on the top face of the coin slot housing at the back and locked with a key.
• Remove the long bolt that’s often hexagonal in cross section and runs from the front of the housing to the maintenance panel.
• There may be some wiring to the slot mechanism, disconnect it.
• Carefully pull the slot mechanism free.
• You should be able to see the offending coin if you need to dismantle the unit any further, continue to take notes and diagrams.
• Once you’ve removed the coin, test it with a fresh one and if all is well, reverse the process to reassemble.

Diy Coin Slot Mechanism Coins

If the problem continues the coin slot mechanism may need replacing. Since you now know how to remove it, you also know how to replace it. Call your local parts distributor and order a new one appropriate for your model or give us a call.